Armstead Trade Quick Dry Gloss

Armstead Trade Quick Dry Gloss, non yellowing, high sheen finish
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • High gloss finish
  • For interior & exterior use
  • Waterbased and non yellowing
  • Quick Drying
Technical Information
  • Finish Gloss
  • Coverage Up to 15m2/litre
  • Drying Time 2-4 hours
  • Recoatable 4-6 hours
  • Thinning Water 10
  • Composition Water-based
Product Features
  • Quick Dryring
  • Durable
Armstead Trade Quick Dry Gloss is a professional quality, non-yellowing, tough, durable, fast drying, water-based high sheen finish with good flow and application properties. Suitable for use on interior and exterior wood and metal surfaces.
STIR THOROUGHLY BEFORE USE. When painting new and bare wood apply one or two coats of Armstead Trade Quick Dry Wood Primer Undercoat, followed by one or two coats of Armstead Trade Quick Dry Gloss. Touch Dry: 2-4 hours. Recoat: 4-6 hours. Drying time dependent upon temperature & humidity.
Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.
Colour Palette Fandeck, Heritage, Armstead Colour Guide, BS4800, RAL Classic, National Colour Wall, Cuprinol Garden Shades
  • 1. Preparing the Surfaces
    To get the best results with Armstead Trade Quick Dry Gloss, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Armstead Trade Datasheet AM218 for full information before use, available free on request by telephoning 0333 222 7070 or visiting armsteadtrade.co.uk. Before surface preparation, read the adjacent information about old lead paints.
  • 2. After use
    Cleaning After Final Use: Clean brushes and rollers immediately after final use to reuse them for future projects, saving you money and reducing waste. Cleaning Steps: 1. Remove Excess Paint: Scrape off leftover paint into a container for reuse. 2. Wash with Warm, Soapy Water: Clean brushes and rollers with warm soapy water in a sealed container like a bucket or tub. 3. Rinse Thoroughly: Rinse out all soap and paint residues into the same container. 4. Dry Naturally: Let tools air-dry and store in a dry, dust-free area. Dispose Responsibly: Settle Solids: Let paint solids settle at the bottom of the container. Pour off clear water for reuse or disposal. Disposal: Let remaining paint solids dry fully before disposing of them as solid waste. Do not flush paint down the drain, including when cleaning painting tools Pro Tip: Watch this cleaning guide from the British Coatings Federation and Dulux Connect contractor Bagnall’s: https://coatings.org.uk/general/custom.asp?page=HowToCleanPaintbrushes
  • 3. Storing
    Storing & Responsible Disposal Do not use or store paint in extreme temperatures and protect from damp & frost. Reuse, Recycle, or Donate- Whenever possible, reuse, recycle, or donate leftover paint. Find local services at recyclenow.com. If no Community RePaint service is nearby, consider advertising paint locally—many good causes need it to brighten community spaces. Dispose Responsibly- Never pour paint or wastewater down drains or sinks. Follow instructions at recyclenow.com to recycle empty packs. Reuse Roller Cages- Remove sleeves and store cages in a dry, dust-free place. Dispose of Unusable brushes and Sleeves- If brushes or sleeves cannot be cleaned or reused, dispose of them in general waste to avoid recycling issues. Paint Wash Water- Collect wash water in a container; don’t pour it into drains or on the ground. Let solids settle, pour off clear water for reuse or disposal, and let solids dry before disposing as solid waste. Do not flush paint down drains, including when cleaning tools.
Fetching the data, please wait...