Armstead Trade Anti-Mould Vinyl Matt

Armstead Trade Anti-Mould Vinyl Matt helps to reduce the growth of mould and algae
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Helps to reduce the growth of mould and algae
  • Minimises surface imperfections
  • Water based
Technical Information
  • Finish Matt
  • Coverage Up to 14m2/litre
  • Drying Time 1-2 hours
  • Recoatable 2-4 hours
  • Thinning Water 10
  • Composition Water-based
Product Features
  • High Opacity
Armstead Trade Anti-Mould Vinyl Matt is a professional quality, high opacity matt emulsion that inhibits the growth of mould and algae and minimises surface imperfections. Suitable for all normal interior wall and ceiling surfaces, especially those at risk of disfigurement due to mould growth.
STIR THOROUGHLY BEFORE USE. Apply 1 or 2 coats of Armstead Trade Anti-Mould Vinyl Matt. Coverage up to 14m²/l on smooth surfaces of average porosity. Touch Dry: 1-2 hours. Recoat: 2-4 hours. Drying time dependent upon temperature & humidity.
Application-Brush or roller only. For Health and Safety reasons related to all fungicidal paints, spray application is not recommended.
Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.
Colour Palette Fandeck, Heritage, Armstead Colour Guide, BS4800, RAL Classic, National Colour Wall, Cuprinol Garden Shades
  • 1. Preparing the Surfaces
    To get the best results with Armstead Trade Anti-Mould Vinyl Matt, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). Treat any existing mould or organic growth with Weathershield Multi-Surface Fungicidal Wash from Dulux Trade. See Armstead Trade Datasheet AM213 for full information before use, available free on request by telephoning 0333 222 7070 or visiting armsteadtrade.co.uk. Before surface preparation, read the adjacent information about old lead paints.
  • 2. After use
    Cleaning After Final Use: Clean brushes and rollers immediately after final use to reuse them for future projects, saving you money and reducing waste. Cleaning Steps: 1. Remove Excess Paint: Scrape off leftover paint into a container for reuse. 2. Wash with Warm, Soapy Water: Clean brushes and rollers with warm soapy water in a sealed container like a bucket or tub. 3. Rinse Thoroughly: Rinse out all soap and paint residues into the same container. 4. Dry Naturally: Let tools air-dry and store in a dry, dust-free area. Dispose Responsibly: Settle Solids: Let paint solids settle at the bottom of the container. Pour off clear water for reuse or disposal. Disposal: Let remaining paint solids dry fully before disposing of them as solid waste. Do not flush paint down the drain, including when cleaning painting tools Pro Tip: Watch this cleaning guide from the British Coatings Federation and Dulux Connect contractor Bagnall’s: https://coatings.org.uk/general/custom.asp?page=HowToCleanPaintbrushes
  • 3. Storing
    Storing & Responsible Disposal Do not use or store paint in extreme temperatures and protect from damp & frost. Reuse, Recycle, or Donate- Whenever possible, reuse, recycle, or donate leftover paint. Find local services at recyclenow.com. If no Community RePaint service is nearby, consider advertising paint locally—many good causes need it to brighten community spaces. Dispose Responsibly- Never pour paint or wastewater down drains or sinks. Follow instructions at recyclenow.com to recycle empty packs. Reuse Roller Cages- Remove sleeves and store cages in a dry, dust-free place. Dispose of Unusable brushes and Sleeves- If brushes or sleeves cannot be cleaned or reused, dispose of them in general waste to avoid recycling issues. Paint Wash Water- Collect wash water in a container; don’t pour it into drains or on the ground. Let solids settle, pour off clear water for reuse or disposal, and let solids dry before disposing as solid waste. Do not flush paint down drains, including when cleaning tools.
Fetching the data, please wait...